Description Of The Device - Superrollo RM10MS Notice De Montage Et D'utilisation

Description of the device

■ Use only genuine replacement parts and accessories from superrollo.
Information on this can be found in the chapter entitled Accessories from
page 28
■ Make sure that repairs on the device are only carried out by the superrollo
customer service.
■ In particular, observe DIN 12045 - additional protective facilities and
terminations for facades and wall openings which are equipped with windows
and French windows.
Avoiding being locked out
■ Make sure that you are located inside the building when a door's roller shutter is
automatically closed.
Avoiding damage
■ Use the device in dry rooms only.
■ Only connect the device to a 230 V~50 Hz current connection which is fused in
the building.
■ Use the device with smoothly running roller shutters only.
■ Use only genuine replacement parts and accessories from superrollo.
Description of the device
Scope of delivery
Tubular motor
Adjustment tool
Driver
Securing clip
18
1
7
Structural features of the information on dangers
The following categories of information on dangers are contained in these
operating instructions:
DANGER
Notices containing the word DANGER warn of a hazardous
situation which leads to death or severe injuries.
WARNING
Notices containing the word WARNING warn of a hazardous
situation which may possibly lead to death or severe injuries.
CAUTION
Notices containing the word CAUTION warn of a situation which
leads to slight or moderate injuries.
Structural features of notices regarding material and
environmental damage
ATTENTION
These notices warn of a situation which leads to material or
environmental damage.
6 5
2 x cotter pin
Drive bearing
Adapter
2
4 3