Residual Risks And Protective Devices - Festo MPS 8082795 Notice D'utilisation

4.4

Residual risks and protective devices

In order to avoid residual risks, notes included on the product itself must be observed in addition to all of
the safety instructions in these operating instructions.
The condition of warning signs must be examined prior to commissioning. If they are illegible or missing,
they must be replaced before commissioning.
Please check opening of the brake using the button on the control panel after applying the supply voltage.
Please hold the cantilever axis securely by hand.
Caution
If you do not hold the cantilever axis securely, this will fall to the lower stop and
cause a collision.
For this reason, always make sure you hold the cantilever axis securely when
pressing the button.
© Festo Didactic 8083287
Storing/Conveyor station
1: Sticker: (2x):
Warning concerning a hazard
2: Sticker (5x):
Warning concerning danger of
pinching of the hand
3: Sticker:
Warning concerning a hot surface
45