Aux Mode - Krüger & Matz KM0670 Mode D'emploi

5. LED indicator LED indicator
6. Micro USB
7. AUX input
8. Microphone
Bluetooth mode - Pairing
1. Keep the devices in near distance (preferably within 1 meter).
2. Press and hold the
wait a few seconds until blue light blinks; device enters Bluetooth
pairing mode.
3. Turn on the Bluetooth on your phone (or other device), and search
for external devices.
4. Pair with the headphones (KM 670). The headphones will issue a
sound signifying successful pairing.
Note:
• When in Bluetooth mode, when there is an incoming call the
headphones will switch to call automatically.
• Please note, playback time/talk time as well as Bluetooth range depends
on various numerous factors, and my differ from the stated value.

auX mode

To enter AUX mode, just plug in the cable. The headphones will turn off
and enter AUX mode automatically; then start the playback from the
external device.
Note:
• the built-in microphone of the headphone will not work when
under the AUX mode.
• playlist management and volume control in AUX mode are available
only on the external device.
8
• charging (red)
• pairing /
operation (blue)
• ANC (green)
Micro USB port
(charging)
3,5 mm input
Microphone
button to turn the headphones on, and
Owner's manual