Locating A Disc By Name; List-Up - Sony CDX-MP40 Mode D'emploi

Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT information.
To
View
Tip
Other items can be displayed (page 12).
Erasing the Disc Memo
1
Press (SOURCE) repeatedly to select
"CD."
2
Press (MODE) repeatedly to select the
CD unit storing the Disc Memo.
3
Press (PTY) (LIST) for 2 seconds.
4
Press (DSPL) for 2 seconds.
The stored names will appear.
5
Press the volume +/– button
repeatedly to select the disc name you
want to erase.
6
Press (SEL) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (PTY) (LIST) for 2 seconds.
The unit returns to normal play mode.
Notes
• When the Disc Memo for a CD TEXT disc is erased,
the original CD TEXT information is displayed.
• If you cannot find the Disc Memo you want to erase,
try selecting a different CD unit in step 2.
• If you have already erased all of the Disc Memo, the
unit returns to normal play mode in step 4.
14
Press
(DSPL) during CD/CD
TEXT disc playback

Locating a disc by name

— List-up (For a CD unit with the CD TEXT/
CUSTOM FILE function, or an MD unit)
You can use this function for discs that have been
assigned custom names*
2
discs* .
*1 Locating a disc by its custom name: when you
assign a name for a CD (page 13) or an MD.
*2 Locating discs by the CD TEXT information: when
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
1
Press (PTY) (LIST) momentarily.
The name assigned to the current disc appears
in the display.
2
Press (PTY) (LIST) repeatedly until
you find the desired disc.
3
Press (SEEK) (+) or (SEEK) (–) to play
the disc.
Notes
• Once a disc name has been displayed for 5
seconds, the display goes back to its normal
playback mode.
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine,"NO MAG"
appears in the display.
• If a disc has not been assigned a custom file,"NO
NAME" appears in the display.
• If the disc information has not been read by the unit,
"NOT READ" appears in the display. To load the
disc, first press the number button, then choose the
disc that has not been loaded.
• The information appears only in upper case. There
are also some letters which cannot be displayed
(during MD playback).
1 or for CD TEXT