Technical Data; Note; Warning - TOOLCRAFT 1582579 Notice D'emploi

12. Technical data

Rated voltage...............................................................................230-240 V/AC, 50 Hz
Rated power input........................................................................800 W
Speed, n0......................................................................................800 – 3200 /min
Cutting capacity............................................................................Steel: 10 mm
Level of acoustic pressure LpA.....................................................90,0 dB(A); K=3 dB(A)
Level of acoustic power LwA........................................................101,0 dB(A); K=3 dB(A)
Level of vibration (K=1.5 m/s2).....................................................Cutting board: αh,B= 8,326m/s²
Cutting sheet metal: αh,M= 9,045m/s²
a) Note
• The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another.
• The declared vibration total value may also be used in a preliminary assessment of exposure.
b) Warning
• The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
• Avoid vibration risk.
Wear glove during operation.
Limit operating time and shorten trigger time.
Wood: 100 mm
31