Valley Electronics Daysy Mode D'emploi page 8

14
Step 3: Entering your
menstruation on your Daysy
If the violet "Menstruation" light is flashing in the activation ring, it means
that Daysy is asking you for your menstruation input.
– Menstruating? "Yes": Confirm you are menstruating by pressing the activation
button until the violet light lights up without flashing and you hear a "beep-
beep". Confirm you are menstruating for each day of active bleeding and flow
for a minimum of three consecutive days.
– Menstruating? "No": You do not have to do anything; the violet light keeps flashing.
– You are menstruating, but Daysy is not showing the flashing violet light:
Enter your menstruation input by holding down the activation button until
the violet light is constantly lit.
Important: The first time you start bleeding after you stop taking the pill, or stop using other hormonal
methods of birth control, is referred to as hormonal withdrawal bleeding and does not mean that you
are menstruating. Under no circumstances should you enter this bleeding as menstruation.
DaysyView:
Better informed with the Daysy app Better informed with the Daysy app
DaysyView gives you valuable information about your
cycle. It also lets you share your information with your
partner.
Turn on Bluetooth
and press the Daysy activation button twice. A blue light
will light up on your Daysy followed by a brief melody.
If the blue light stays lit, it means the connection was
successful. Afterwards, simply follow the instructions on
the app.
®
on your mobile phone, open DaysyView,
15