Maytag NEPTUNE MDE6700AYW Guide D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

U U
SING THE CONTROLS
Step 4
S
O
(
ELECT
PTIONS
Adjust Time
Time can be added or subtracted from the automatically set
times in the Time Dry, Freshen Up (select models), Delicates,
Air Fluff, Wrinkle Release or Quick Dry (select models)
cycles.
To add or subtract time from the cycle, press the Adjust
Time up or down arrow pad until the desired time is dis-
played.
End of Cycle Chime
When the cycle is complete, an audible chime will sound.
When the Wrinkle Prevent option is selected, the chime will
sound intermittently. Adjust the volume of the chime or turn
it off by pressing the Chime pad. Press the pad repeatedly to
scroll through the choices.
Wrinkle Prevent
Wrinkle Prevent provides approximately 95 minutes of inter-
mittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press the Wrinkle Prevent pad to acti-
vate this feature.The indicator light above the pad will illumi-
nate when Wrinkle Prevent is selected. Chasing lights appear
in the display when the Wrinkle Prevent option is selected
(select models).The load is dry and can be removed at any
time during the Wrinkle Prevent cycle.
Control Lock
The control panel can be locked for safety, cleaning or to pre-
vent unwanted use.The panel will not function when locked.
To lock the controls, press and hold the Sensor Dry Level
and Temperature pads for 3 seconds.The Control Lock
indicator light will illuminate.
To unlock the controls, press and hold the Sensor Dry
Level and Temperature pads for 3 seconds.The Control
Lock indicator light will go out.
Step 5
S
D
TART THE
RYER
Press the Cycle Selector dial to start the dryer.The dryer
door must be closed for the dryer to operate. If the door is
opened during the cycle, the Cycle Selector dial must be
pushed again to resume the cycle once the door is closed.
)
IF DESIRED
8

Publicité

Table des Matières
loading

Table des Matières