Environmental Conditions; Qualified Personnel; Copyright; Data Backup - Fronius Smart Meter 240V-3 UL Instructions De Service

Never bypass or disable protection devices.
For the location of the safety and danger notices on the device, refer to the section
headed "General" in the Operating Instructions for the device.
Any equipment malfunctions which might impair safety must be remedied immediately
before the device is turned on.
Your personal safety is at stake!
Environmental Operation or storage of the device outside the stipulated area will be deemed as not in
conditions accordance with the intended purpose. The manufacturer accepts no liability for any
damage resulting from improper use.
Qualified person- The servicing information contained in these Operating Instructions is intended only for
nel the use of qualified service engineers. An electric shock can be fatal. Do not carry out
any actions other than those described in the documentation. This also applies to quali-
fied personnel.
All cables and leads must be secured, undamaged, insulated, and adequately dimen-
sioned. Loose connections, scorched, damaged, or under-dimensioned cables and leads
must be repaired immediately by an authorized specialist.
Maintenance and repair work must only be carried out by an authorized specialist.
It is impossible to guarantee that externally (aka, third-party) procured parts are designed
and manufactured to meet the demands made on them, or that they satisfy safety
requirements. Use only original spare parts (also applies to standard parts).
Do not carry out any alterations, installations, or modifications to the device without first
obtaining the manufacturer's permission.
Components that are not in perfect condition must be changed immediately.

Copyright

Copyright of these Operating Instructions remains with the manufacturer.
Text and illustrations were accurate at the time of printing. Fronius reserves the right to
make changes. The contents of the Operating Instructions shall not provide the basis for
any claims whatsoever on the part of the purchaser. If you have any suggestions for
improvement, or can point out any mistakes that you have found in the Operating
Instructions, we will be most grateful for your comments.

Data backup

The user is responsible for backing up any changes made to the factory settings. The
manufacturer accepts no liability for any deleted personal settings.
FCC / RSS Com- FCC
pliance This device corresponds to the limit values for a digital device of class B in accordance
with Part 15 of the FCC regulations. The limit values should provide adequate protection
against harmful interference in homes. This device creates and uses high frequency
energy and can interfere with radio communications when not used in accordance with
the instructions. However, there is no guarantee against interference occurring in a par-
ticular installation.
If this device interferes with radio or television reception when turning the device on and
5