Cleaning And Maintenance - nedis RDFM5010 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Advice for better reception
FM: Fully extend the telescopic antenna and position it for better reception.
AM: The device has a built-in antenna. Change the position of the device if reception is
poor.
Frequency adjustment
Tune in the desired station by rotating the frequency scale. Rotating clockwise increases
and rotating counter-clockwise decreases the frequency.
The current adjusted frequency for selected band can be read on the frequency scale.
AUX-in function
It can be used for listening music from any kind of audio reader device (MP3 etc.).
Connect a cable (double 3.5 mm jack–not included) between the audio reader and the line-in
jack of the radio (on the side of the radio).
Select the desired music. Adjust the volume with the radio volume control.
If you do not use the aux in function, take out the 3.5 mm aux plug from the radio and the
unit and enter to power management mode.
Tone control
Adjust the tone by rotating the tone knob. By rotating to the left the bass is intensified,
rotating to the right intensifies the treble.
GENERAL OPERATION FOR Bluetooth® WIRELESS TECHNOLOGY
1. Place the radio and device where they are no more than 10 meters apart.
2. Select FM or AM with the FM/AUX/AM select button.
3. Activate the Bluetooth® function of the device and set it to search for Bluetooth®-enabled
devices.
4. While searching for the device, the radio LED indicator flashes.
5. Wait until "DR70BT" appears in the list of your Bluetooth® device.
6. Select "DR70BT".
7. When Bluetooth® connection is made, the radio LED indicator is on.
8. Press the play/pause button for playing or pausing the music.
9. Press the track buttons to select tracks.
10. Adjust the volume & tone control located on the top of the radio for desired volume level
and high-low tone level.

CLEANING AND MAINTENANCE

Please also observe the safety advices.
Before cleaning always pull the power plug.
Clean the housing with a soft and moist cloth and a mild detergent.
Never use abrasive detergents or sharp utensils.
6
ENGLISH

Publicité

Table des Matières
loading

Table des Matières