Radio Operation - nedis RDFM5010 Série Mode D'emploi

ENGLISH
Mains operation
The device is designed for mains power supply AC 230–240 V~50 Hz. Do not connect the
device to any other power supply to avoid damage that is not covered by your warranty.
1. Connect the connector to the AC socket at the rear of the device. Make sure that it is
completely inserted.
2. Insert the mains plug to a wall outlet.
3. Disconnect the power cord from the mains when not in use.
GENERAL OPERATING INSTRUCTIONS
On/off
Switch on the device by turning the volume control clockwise, until you overcome the point
of resistance. Switch off the device by turning the volume control counter-clockwise, until
you overcome the point of resistance.
Volume control
Increase or decrease the volume by rotating the volume control to the left or right.

RADIO OPERATION

Select with the FM, AM or AUX buttons to choose desired frequency band.
5