Display Elements; Using The Thermocouple(S) - SKF TKDT 10 Mode D'emploi

5. Display Elements

12
11
1. Setup Mode
2. Offset correction
3. Frozen readings
4. Auto Power Off enabled
5. Top display:
T1, T2, T1-T2
6. Temperature units

6. Using the thermocouple(s)

1. Plug the thermocouple(s) into the T1 and/or T2 input connector(s).
2. Press to turn on the thermometer.
Enter
After 1 second the thermometer displays the first reading.
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows "- - - -".
SKF TKDT 10
1 2
7. Bottom display: MAX, MIN, AVG,
T1 or T2 readings
8. MAX, MIN, AVG display
9. Time Stamp
10. Min:sec or hour:min
11. Thermocouple
type K
12. Low battery symbol
3 4
5
6
7
8
9
10
7