Introduction; Technical Data - SKF TKDT 10 Mode D'emploi

1. Introduction

The SKF TKDT 10 is suitable for a wide range of applications and has
the facility to allow two SKF temperature probes to be connected.
A large back-lit LCD display helps ensure that the temperatures can be
easily read in almost all environments.

2. Technical data

General
Display
Displayed resolution
Backlit display
Measurement modes
Measurment Units
Auto Switch Off
Contact Probe Measurement
Temperature using probe
Accuracy
Probe compatibility
Probe supplied
Supplied probe length
Probe response time
Battery and Power
Battery
Operation time
Size and Weight
Product Dimensions
Product Weight
Carrying Case dimensions
Total weight (incl. case)
Operating Requirements
Operating temperature
Storage temperature
Relative Humidity
IP rating
SKF TKDT 10
Large Backlit LCD
0,1° up to 1 000°, otherwise 1°
On/Off
Min, max, average, differential,
dual temperature reading
°C, °F, K
20 minutes, On/Off
–200 °C to +1 372 °C
(–328 °F to +2 501 °F)
> –100 °C (> –148 °F):
±0,5% of reading ±1 °C (±1.8 °F)
2 ™ Type-K connectors
TMDT 2-30, suitable for use up to
900 °C (1 650 °F)
130 mm (5.1 in)
2,3 seconds (TMDT 2-30)
3 ™ AAA Alkaline type IEC LR03
18 hours typical use (backlight on)
160 ™ 63 ™ 30 mm
(6.3 ™ 2.5 ™ 1.2 in)
200 g (0.4 lbs)
530 ™ 85 ™ 180 mm
(20.9 ™ 3.4 ™ 7.0 in)
1,1 kg (2.4 lbs)
0 to 50 °C (32 to 120 °F)
–10 to +60 °C (–4 to +150 °F)
10 to 90% RH non-condensing
IP 40
5