About The Input Jacks On This Unit; Connection To Input1; Connection To Input2 - Pioneer PDP-505HD Mode D'emploi

I C
NSTALLATION AND ONNECTIONS
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

About the input jacks on this unit

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Connect the output jacks of components to the input
jacks of this unit following the list below (pages 10 to 14).
Input of
this unit
INPUT1
Connected
component
and signals
AV component
Composite video
S video
Component video
RGB
Personal computer
(PC)
Composite video *3
*3
S video
RGB
*1 Although INPUT3 and INPUT4 are compatible with various
kinds of signals, setup using the on-screen menu is
necessary after connections are made in order match the
characteristics of the source component (pages 17 to 19).
*2 INPUT4 is compatible with Microsoft's Plug & Play (VESA
DDC 1/2B). INPUT3 is not compatible with this.
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
10
<ARE1349> En
*1 *1
INPUT2 INPUT3 INPUT4
*2

Connection to INPUT1

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Connect an AV component that has a video or S-video
output jack to the INPUT1 jacks on the main unit. It is
possible to use both the VIDEO and S-VIDEO jacks of
INPUT1 at the same time for the connection. However, if
simultaneous signals are received, the S-video signal is
given priority.
VIDEO S-VIDEO
INPUT1
If necessary, use the Pin/BNC conversion adapter to
make connections.

Connection to INPUT2

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Connect an AV component that has component video
output jacks to the C-VIDEO input jacks on this unit. Be
sure to match the colors of the component cable plugs
with the colors of the jacks on both components.
Y C /P C /P
B B R R
C-VIDEO
INPUT2
For the screen sizes and input signals that INPUT1 and
INPUT2 are compatible with, please refer to
supplement 1 (page 55).
AV component
AV component