Pioneer PDP-505HD Mode D'emploi page 29

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Automatic selection of screen size
according to input signal
By distinguishing between signals such as S1, S2 and
HDTV video signals, screen size is automatically selected
and the following indicators are displayed on the screen.
Input signal
When S1 video signal (squeeze) is input
When S2 video signal (letterbox) is input
When HDTV signal (1920 x 1080 i, 1280 x 720 p) is
input
During personal computer signal input
1 ORIGINAL
The input signal and the screen maintain a dot to line ratio
of 1:1 and is thus highly faithful to the source.
A
640 dots
1280 dots
(Illustration shows 640 x 480 input.)
2 4:3 NORMAL
The display fills the screen as much as possible without
altering the aspect ratio of the input signal.
A
Operation
"FULL" screen size is automatically selected.
"ZOOM" screen size is automatically selected.
"FULL" screen size is automatically selected.
3 FULL
The display is presented with a widescreen aspect ratio
of 16:9 and fills the entire screen.
480 lines
768 lines
Screen indication
A
O
PERATIONS
FULL (S1)
ZOOM (S2)
FULL (HD)
25
<ARE1349> En