Bosch BGS5335 Notice D'utilisation page 6

Only brush vacuum using full suction power, i.e.
maximum power setting on the vacuum cleaner.
In order to achieve the optimum cleaning effect for
different types of floor coverings, the suction regulator
should be adjusted accordingly, depending on the type of
carpet.
=> long pile/closely woven carpets
=> short pile/loosely woven carpets or hard floors
In the viewing window at the side, you can tell from the
speed at which the turbine is turning how fast the brush
roller is rotating.
If the brush is vacuuming too firmly or is turning too slowly,
the suction regulator should be turned further towards the
symbol.
Only brush carpet fringes in the direction of the arrow.
Always switch off the vacuum cleaner and unplug the
power cable before carrying out maintenance work.
Remove the turbo brush from the suction/telescopic tube
Release the brush roller using the unlocking knob and pull
it sideways out of the turbo brush.
Use scissors to cut through threads and hairs wound
round the rollers.
Vacuuming off threads and hairs.
Push the brush roller in sideways along the guide rod and
lock in place using the unlocking knob.
The turbo brush must only be put into
operation with the brush roller fitted.
Subject to technical modifications.
4