Self-Cleaning Function - SOLAC BV5713 Mode D'emploi

"PULSE / ICE CRUSH" FUNCTION
The appliance works in highest speed to achie-
•
ve optimal performance.
Press this button (I) to operate and release the
•
button (I) when you wish to stop operating.
This function gives optimal result for ice-crus-
•
hing, up to desired snowy level.
We recommend working by pressing the but-
•
ton in cycles of 3 seconds and repeating the
operation until you obtain the desired result.
To crush ice cubes, put no more than 4 ice cu-
•
bes at one time. If you wish to add more ice,
pull out the measuring cup and insert the ice
cubes consecutively.
AD3503 MILL:
Open the lid by turning it in clockwise direction.
•
Put the ingredient into the grinder bowl (only
•
dry ingredients). Do not overfill the bowl.
Turn the mill unit clockwise until the lock clicks
•
into place. Connect the appliance to the mains.
Choose desired speed to start grinding.
•
To stop the appliance set the speed back to
•
"0".
ONCE YOU HAVE FINISHED USING THE
MILL UNIT:
Select the "0" position at the speed selector.
•
Unplug the appliance to the mains.
•
Lift the mill unit from the motor body.
•
Turn the lid counter clockwise to open it.
•
Clean the appliance.
•
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
or base pH such as bleach, or abrasive pro-
ducts, for cleaning the appliance.
Do not let water or any other liquid get into the
•
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
•
other liquid or place it under running water.
During the cleaning process, take special care
•
with the blades, as they are very sharp.
If the appliance is not in good condition of clean-
•
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
The following pieces may be washed in a di-
•
shwasher (using a soft cleaning program):
- Jug.
- Measuring cup
- Grinder Bowl.
Do not place the lid into a dishwasher or boiling
•
water, the lid may deform.
Then dry all parts before its assembly and sto-
•
rage.

SELF-CLEANING FUNCTION:

Put water and a small amount of washing up
•
liquid in the jar.
Select the function "turbo".
•
REMOVABLE BLADES FOR EFFECTIVE
CLEANING:
Loosen the blade fixing ring by turning it in
•
clockwise direction. (Fig.2).
Remove the blade set and sealing ring and
•
clean them. (Fig.3).
After cleaning, replace the blade set and turn
•
blade fixing ring in opposite direction.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
•
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
•
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations
•
of substances that could be considered harm-
ful to the environment.
- This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic Equipment
(WEEE).
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU
on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products.
EN