Before Use - SOLAC BV5713 Mode D'emploi

for more time than necessary
As a reference in the annexed table appears
•
several recipes, that include the amount of
food to process, the recommended operating
time to elaborate each recipe, as well as the
time of maximum operation of the apparatus
under each one of these conditions of load
Ingredient Max. Quantity
All types of Liquid 1.50 l
Carrots and
600 grs carrots,
water mixture 900 ml water
4 cubes at one
Ice
time, or, add 1
cube each time
120 grs wheat
Wheat
Do not blend dry, thick or heavy mixtures for
•
more than 10 seconds continuously. Let the
appliance cool down to room temperature be-
fore continue operating the appliance again.
Do not use the appliance with frozen goods or
•
those containing bones.
After every max operation period, please let
•
the appliance cool down to room temperature
before continue operating the appliance again.
CAUTION: Do not use the appliance if the
•
glass is cracked or broken.
SERVICE:
Make sure that the appliance is serviced only
•
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
Any misuse or failure to follow the instructions
•
for use renders the guarantee and the manu-
facturer's liability null and void.
DESCRIPTION
A Measuring cup
B Jar lid
C Sealing jar ring
D Jar
E Blade set
F Blade fixing ring
G Motor body
H Speed selector
I Turbo / Ice crush function
J Grinder Bowl (*)
K Blade fixing ring (*)
M Grinder Blades - lid (*)
(*) Only available in the model BV5703.
•
If the model of your appliance does not have
•
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all products' packaging has
•
Duration
been removed.
Before using the product for the first time, clean
10 sec.
•
the parts that will come into contact with food in
the manner described in the cleaning section.
2 minutes
USE:
Unroll the cable completely before plugging it
•
20 seconds
in.
(Operating cycle of
3 sec)
Ensure the blade set is fixed properly to the jar
•
(by turning counter clockwise) before putting
30 seconds
on the motor body.
(Operating cycle of
10 sec) Place the jar onto to the motor body until it fits
•
properly into place. (Fig.1).
Put the ingredients, after having first chopped
•
them into small piece, into the jar with liquid
(do not exceed the maximum marker).
Put the lid on the jar; make sure it is properly
•
fixed in place.
Put the measuring cup in the lid.
•
Connect the appliance to the mains.
•
Turn the appliance on, by using the selection
•
knob.
Choose desired speed and start blending.
•
If you wish to add more ingredients pull out the
•
measuring cup.
Add the ingredients and replace the measuring
•
cup.
To stop the appliance set the speed back to "0".
•
To avoid a fierce start up of the fan, it is advisa-
•
ble to start off from the lowest speed position
and, once the fan has been switched on, pro-
gressively increase the speed to the desired
position.
ELECTRONIC SPEED CONTROL:
The speed of the appliance can be regulated
•
by using the speed regulator control (H). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
•
Lift the jar from the motor body.
•
Clean the appliance.
•
EN