Charging Function - TFA 60.5013 Mode D'emploi

TFA_No. 60.5013_Anleit_04_20
Radio-controlled projection alarm clock with thermometer

7.8 Charging function

• Attention: The charging function only works with the power adapter.
• Plug the USB cable (not included) into the USB port on the alarm clock and
connect the other end to your mobile device. Make sure that the USB charg-
ing function is suitable for your mobile device (charging current 500 mA).
• Do not apply excessive force when connecting the USB plug. A USB plug fits
only one way into the USB port.
8. Care and maintenance
• Clean the instrument with a soft damp cloth. Do not use solvents or scouring
agents. Protect it from moisture.
• Remove the batteries and pull out the plug of the socket, if you do not intend
to use the product for a long period of time.
• Keep the device in a dry place.
9. Troubleshooting
Problems Solution
No display Operation with power adapter:
➜ Connect the device to the power adapter
➜ Check the power adapter
Battery operation:
➜ Ensure the batteries' polarity are correct
➜ Change the batteries
➜ Connect the device to the power adapter
No permanent projection
➜ Slide the switch CONTINUE PROJECTION in
➜ Wait for the DCF signal reception
➜ Press and hold °C / °F / WAVE button for two
No DCF reception
22
02.04.2020 14:55 Uhr
direction of the arrow
seconds to activate the reception
Seite 12
Radio-controlled projection alarm clock with thermometer
No charging function
Incorrect indication
If your device fails to work despite these measures contact the supplier from
whom you purchased it.
10. Waste disposal
This product has been manufactured using high-grade materials and compo-
nents which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in
household waste.
As a consumer, you are legally required to take them to your retail
store or to an appropriate collection site depending on national or
local regulations in order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg = mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Elec-
trical and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The
user is obligated to take end-of-life devices to a designated collec-
tion point for the disposal of electrical and electronic equipment, in
order to ensure environmentally-compatible disposal.
➜ Choose another place for the instrument
➜ Manual setting of the clock
➜ Wait for attempted reception during the night
➜ Check if there is any source of interference
➜ Restart the device according to the manual
➜ Connect the device to the power adapter
➜ Check the USB port connection
➜ Change the batteries
23