Maco PROTECT Notice D'utilisation page 8

right
I. All functions at a glance
• We recommend you to wash your hands before enrolling
master-fingers or user-fingers!
• When using the device for the first time or after a power failure,
please wait for about 3 minutes until the fingerprint sensor has
reached the optimal operating temperature.
Function
Enroll
Master-
finger
Enroll
User-finger
Open Door
Delete
all stored
fingers
(Reset):
Unlock the
terminal
The parts in this package
must not be exchanged with
third-party pack parts!
Description
Configure
master-fingers
Scan
user-fingers
Reset device
to default
settings
Exit the locked
mode
wrong
Procedure
Default settings
(Red + Green + Blue LEDs on)
⇒ Enroll 3 x Master-fingers
1 x Master-finger ⇒ at least
3 times per User-finger ⇒
1 x Master-finger
Swipe User-finger across the
sensor
3x Master-finger ⇒ please wait
30 sec. ⇒ Default settings
(Red + Green + Blue LEDs on)
Swipe an enrolled finger
(master-finger or user-finger) 2 x
consecutively over the sensor
- 8 -