Maco PROTECT Notice D'utilisation page 7

User´s manual
Access Control Systems
MACO openDoor Touch
Technical Specifications:
Dimensions External Unit (WxH):
Fingerprint Sensor:
Operating Voltage:
Power Consumption:
Operating Temperature:
Storage Capacity:
Note:
1. So called master-fingers are any finger that can be registered as a
user-finger. User-fingers are any finger that will be authorized later
to open the door. The default settings (all 3 LEDs light up) will
automatically store the first 3 enrolled fingers (e.g. right thumb) as
master-fingers. Master-fingers shall not be enrolled as user-fingers!
2. After each fingerprint scan (swiping a finger across the sensor),
please wait for about 3 seconds until the corresponding LED lights
up: You may now proceed to scan the next finger.
3. Swiping fingers over the sensor – Advices:
⇒ Swipe the finger across the sensor evenly and applying gentle
pressure
⇒ Make sure that most of the fingerprint pattern is captured during the
scan (see figure on the next page).
4. Which finger should you use?
⇒ If you have slim fingers, use your thumb or index finger.
⇒ We recommend you to enroll at least two fingers per person (each
finger at least three times; for example, right or left index finger). In
total, up to 150 fingers can be enrolled.
12 - 24V DC 1,5 A
✓
DC direct current
AC alternating current ∼ ≈
45 mm x 76 mm
Swipe sensor without latent
fingerprint Usage > 2 Millions
12 ~ 24V DC
max. 150 mA
-20 ~ +85 °C
Up to 150 Fingerprints
- 7 -
Scan for more Info