Safety Regulations; Items Supplied; Intended Use - EINHELL DSP 226 Instructions D'utilisation Et D'entretien

Anleitung_DSP_226_SPK1:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety regulations

CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Protect yourself and your environment from
accidents by taking the appropriate precautionary
measures.
Do no use the suction spray gun for purposes
other than that for which it is designed.
Keep children away from air tools.
The equipment may only be operated by persons
who are relaxed and concentrated.
Use only a quick-release coupling for the
compressed air connection.
The working pressure must be set on the
pressure reducer.
Do not use oxygen or combustible gases as
power source.
Before carrying out repairs and maintenance
work remove the equipment from the
compressed air source.
Use only original replacement parts.
Wear the necessary protective clothing, in
particular safety goggles and safety gloves,
when working with the suction spray gun.
8
10.02.2009 13:30 Uhr Seite 8
2. Layout
A Suction hose
B Suction tube
C Hose connection
D Nipple for the air connection
E Trigger lever
F Blasting nozzles
G Air nozzles

3. Items supplied

1 Suction spray gun
1 Nipple R 1/4"
1 Suction hose
1 Suction tube
3 Nozzles Ø 5 mm
1 Allen key

4. Intended use

The suction spray gun is a pneumatically operated
tool for versatile use.
It is suitable for sand-blasting painted components
and rusty surfaces.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Only allow repairs and services to be carried out by
authorized professional repair personnel.
Please note:
A hose with inner diameter which is too small
and a hose line which is too long will result in
loss of power.