Table des Matières
Publicité
EC Declaration of Conformity of the Machinery
Declaration according to Directive 2006/42/EC, as amended (hereafter called Machinery Directive).
This language version of the declaration is verified by the authorized representative (original declaration).
We (authorized representative):
Business name:
Haeger Europe
Address:
Textielstraat 18B, 7575 CA OLDENZAAL
Country:
The Netherlands
mandated in writing by the manufacturer:
Business name:
Haeger Inc.
Address:
811 Wakefield Drive, Oakdale, California 95361
Country:
United States of America
declare for the product described below:
Generic denomination:
Fastener Insertion System
Commercial name:
WindowTouch 4
Model:
WindowTouch 4
Function:
Automatic Insertion of fastener in metal plating by
hydraulic pressing.
that all the relevant provisions of the (following version of the) Machinery Directive are fulfilled:
— 2006/42/EC
| Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery,
and amending Directive 95/16/EC.
that the product also complies with the provisions of the following European Directives:
—
2014/30/EU
| Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014
—
on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
that the following harmonized standards have been used:
| Safety of machinery — General principles for design — Risk assessment and risk reduction [ISO 12100:2010].
-
EN ISO 12100:2010
| Safety of machinery — Minimum gaps to avoid crushing of parts of the human body.
-
EN 349:1994+A1:2008
-
EN 693:2001+A2:2011
| Machine tools - Safety - Hydraulic presses.
| Safety of machinery — Ergonomics requirements for the design of displays and control actuators —
-
EN 894-1:1997+A1:2008
o
Part 1: General principles for human interactions with displays and control actuators.
| Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs [ISO 13857:2008].
-
EN ISO 13857:2008
| Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards [ISO 14120:2015]..
-
EN ISO 14120: 2015
| Safety of machinery — Interlocking devices associated with guards — Principles for design and selection [ISO 14119:2013]..
-
EN ISO 14119:2013
-
EN 60204-1:2006+A1:2009+C11:2011
| Hydraulic fluid power — General rules and safety requirements for systems and their components [ISO 4413:2010].
-
EN ISO 4413:2010
| Safety of machinery — Prevention of unexpected start-up.
-
EN 1037:1996+A1:2008
| Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design [ISO 13849-1:2016]..
-
EN ISO 13849-1:2016
| Safety of machinery — Safety-related parts of control systems — Part 2: Validation [ISO 13849-2:2012].
-
EN ISO 13849-2:2012
| Safety of machinery — Emergency stop — Principles for design [ISO 13850:2015].
-
EN ISO 13850:2015
-
EN 61000-6-2:2005
| Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments [IEC 61000-6-2:2005].
-
EN 61000-6-4:2007
| Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments [IEC 61000-6-4:2007].
and that the following natural or legal person established in the Community is authorized to compile the technical file:
Business name:
Haeger Europe
Name and position:
Rob Kelder, Technical Engineer
Address:
Textielstraat 18B, 7575 CA Oldenzaal
Country:
The Netherlands
Oldenzaal, NL August 2017
Wouter Kleizen
President, Haeger Europe
17-00020 Rev. J
e
e
| Safety of machinery — Electrical equipment of machines — Part 1: General requirements [IEC 60204-1:2005 (Modified)].
2
Publicité
Table des Matières
