Glatz FORTINO Mode D'emploi page 12

1. a) a)
c) FORTINO /FORTERO
®
d) d)
2. a) b)
b)
c) FORTELLO
®
d)
b)
1. Positioning and opening shade
a) Put the poles together and tighten securely with the fastener.
b) First place the disc on the upper pole end and then screw the top on.
c) Fix the anchor tie in an appropriate position. Please bear in mind
the exact dimensions. Place the pole in the standpipe and clamp
together with the base tube clamp.
› for FORTINO and FORTERO
®
®
Position pole in base tube and clamp it with base tube clamps.
› for FORTELLO
®
Position pole on base tube and fixate it with mounting screws.
d) Open the shade; pull the bolt lever downwards. Ensure that it
hangs downwards normally and none of the bars cross. Connect the
bolt lever to the runner and press downwards until it stops.
2. Closing
a) Release the bolt lever, unhinge the runner and close.
b) Pull out the material between the bars, fasten carefully and secure
with the tie.
®
E