D+H KA 34-K Notice Originale page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Scope of supply
Drive unit with 2.5 m silicone cable. Depending on
the type of window, different bracket sets are
available separately.
Safety notes
Operating voltage 230 V AC!
Risk of injury from electric shock!
Do not reverse L+N! Connect PE!
- Connection must be carried out by a certified
electrical technician
- Danger of crushing hands and fingers!
- Keep people away from the operating area of the drive
- Keep children away from the control
- Observe pressure load diagram of the chain
- Use only in dry rooms
- Suitable for indoor mounting only.
Use rain detector in locations if there is a risk of rain
- This product may not be operated without the
covering stoppers, which are delivered with
bracket sets
- Use unmodified original D+H parts only
- Observe the bracket-set mounting instructions
Observe enclosed red safety note!
Locking force adjustment
If factory-set locking pressure of approx. 150 N is not sufficient to close the window, it can be infinitely
increased up to approx. 250 N.
Put in covering stopper after adjustment.
Locking force adjustment
99.823.91 2.8/11/17
Ø 6 mm
English
Intended use
- Chain drive for electric opening and closing of
windows and flaps in the facade and roof area
- Operating voltage 230 V AC
- Useable for smoke ventilation, D+H Euro-SHEV
according to DIN EN 12101-2 as well as daily
natural ventilation
- Suitable for indoor mounting only
Features
- Microprocessor controlled electronics
- Protection system for the main closing edge
- Relief of pressure on window gasket after closing
Pressure load diagram
Observe maximum pressure load of the chain!
Maximum pressure load of the chain is not
automatically identical with maximum pressure force
of the drive!
500
400
300
200
100
0
KA 54-K
approx. 150 N
Stroke / (mm)
KA 34-K
approx. 250 N
KA 34-K / KA 54-K
5/16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ka 54-k

Table des Matières