Description Of Unit; Spraying Technique; Functioning Of The Unit - WAGNER SUPER FINISH 17EX Mode D'emploi

GB
GENERAL VIEW OF APPLICATION
3.

DESCRIPTION OF UNIT

3.1

SPRAYING TECHNIQUE

AirCoat
In the AirCoat technique, the materials is pressed through the
nozzle at a relatively low pressure where air is added, practi-
cally surrounding it like a sleeve.
The very fine atomization makes this technique particularly
suitable for top-quality paint work.
36
3.2

FUNCTIONING OF THE UNIT

The following section contains a brief description of the techni-
cal construction for better understanding of the function:
SuperFinish 17ex is a pneumatically driven high-pressure paint
spraying equipment.
The compressed air drives the hydraulic pump via a coupling (1).
A piston (2) is moved up and down so that hydraulic oil is moved
under the diaphragm (3) which then moves.
In detail:
The downwards movement of the machine opens the disk inlet
valve (4) automatically and coating material is sucked in.
During the upwards movement of the diaphragm, the coating
material is displaced and the outlet valve opens while the inlet
valve is closed.
The coating material flows under high pressure through the
high-pressure hose to the spray gun and is atomized when it
exists from the tip.
The pressure control valve limits the pressure of the coating ma-
terial.
A pressure change when the same tip is used also leads to a
change in the amount of paint atomized.
4
3
1
Super Finish 17ex
2