Specifications - MANOSTAT Compulab 3 Notice D'utilisation

Output:
Speed:
RD-1
RD-2
Maximum torque output:
RD-1
RD-2
Speed regulation (all conditions):
Remote contact closures:
Dispense volume:
Dilute volume:
Input:
Supply voltage limits:
115 VAC
230 VAC
Nominal current:
115 VAC
230 VAC
Remote input:
Display:
Construction:
Control console dimensions:
Control console weight:
RD-1 dimensions:
RD-1 weight:
RD-2 dimensions:
RD-2 weight:
Environment:
Operating temperature:
Storage temperature:
Humidity (non-condensing):
Altitude:
Pollution degree:
Chemical resistance:
Environmental protection:
Compliance:

SPECIFICATIONS

7.2 to 720 rpm
7.2 to 720 rpm
10 kg•cm (140 oz-in)
10 kg•cm (140 oz-in)
±0.3% of full speed
28 VDC, 1 A; 28 VAC, 1 A
RD1: 0.1 mL to 5000 L; RD2: 0.1 mL to 7000 L
Sample: 0.1 mL to 100.0 mL
RD1: Delivery: 0.1 mL to 5000 L; RD2: Delivery: 0.1 mL to 7000 L
90 VAC to 130 VAC, 48 Hz to 63 Hz
180 VAC to 260 VAC, 48 Hz to 63 Hz
1.7 A
0.8 A
START/STOP +5 VDC, 5 mA
40-character 2-line backlit LCD
22.6 cm (8.9 in) wide
16.5 cm (6.5 in) deep
2.3 cm (0.9 in) front, 6.9 cm (2.7 in) back in height
1.5 kg (3.2 lbs)
22.3 cm (9.0 in) wide
33.3 cm (13.1 in) deep
14.7 cm (5.8 in) high
8.5 kg (18.8 lbs)
26.2 cm (10.3 in) wide
32.3 cm (12.7 in) deep
17.15 cm (6.75 in) high
9.3 kg (20.5 lbs)
0° to 40°C (32° to 104°F)
−25° to 65°C (−13° to 149°F)
10% to 90%
Less than 2000 m (6500 ft)
Pollution degree 2
(Indoor use — lab, office)
All materials withstand standard cleaning solvents. Materials used in the construction are: a
polyester label, a combined aluminum motor and paint-loc steel controller enclosure, and an
epoxy-based, non-chip paint finish.
Withstands general spills and light sprays (IEC-529 IP22).
Meets UL 508C;
CSA C22.2 No. 14; and
CE EN61010-1 (Safety),
EN61326 (EMC)
22