Instructions for the user
15.5 Cleaning the water tank
To clean the water tank, the cover must be removed.
Proceed as follows:
remove all objects and components inside the oven (racks and dripping pans);
•
using a coin or a flat-head screwdriver, unscrew and remove nut A fastening the cover
•
(detail 1);
take hold of nut B and pull it towards you (arrow a) to free the slot in the cover from the rear pin
•
(detail 2);
still holding the nut B, push slightly back and lift (arrows b, c) and completely remove the cover
•
C from the front guide D (detail 3).
Clean the cover and the water tank following the instructions given in section " 14.1 Cleaning the
stainless steel surfaces".
To reposition and secure the cover, follow the above instructions in reverse order.
Any lime scale can be removed using vinegar; avoid using chemical substances to prevent
possible food contamination.
403