Bosch GKS Professional 18V-68 GC Notice Originale page 26

26 | English
Speed preselection
GKS 18V-68 GC
Six speed settings and the ECO mode are preset in the basic settings. Using a special application (Bosch Toolbox app), two to
six speed settings can be programmed.
The information in the table below describes the preset speeds (default settings) for each programmed number of levels.
Number of speed settings
ECO
2
3
4
5
6
A) ±25 %
You can use the button for speed preselection (36) to preselect the required speed, even during operation.
Status indications
GKS 18V-68 GC
Battery charge indicator Meaning/cause
(user interface) (34)
Green (2 to 5 bars) Battery charged
Yellow (1 bar) Battery almost empty
Red (1 bar) Battery empty
Temperature indicator (40) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Smartphone indicator(38) Meaning/cause
and Power tool status indic-
ator (39)
Yellow Service reminder
Power tool status indic- Meaning/cause
ator (39)
Green Status OK
Yellow Critical temperature has been reached or bat-
tery is almost empty
Red Power tool is overheated or battery is empty
Flashing red Restart protection is triggered
1 609 92A 5FB | (24.02.2020)
Basic speed setting at level
1 2 3
-1 -1
[min ] [min ] [min
A)
3630 – –
2500 5000 –
2500 3800 5000
2500 3300 4200
2500 3100 3800
2500 3000 3500
4 5
-1 -1 -1
] [min ] [min ]
– –
– –
– –
5000 –
4400 5000
4000 4500
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
Solution
For more information see Bosch Toolbox App
or Service
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
Allow the power tool to cool down, or replace
or charge the battery
Turn the power tool off and on again; if neces-
sary, remove the battery and reinsert it.
6
-1
[min ]
–
–
–
–
–
5000
Bosch Power Tools