Playing Media - Fusion MS-UD/AV755 Série Manuel De Demarrage Rapide

Connecting a Compatible Garmin Watch
®
For more information about the watch, see the watch manual at
www.garmin.com.
1
Following the instructions in the watch manual, install the FUSION-Link app
from the Connect IQ ™ store onto the watch.
2
Select the Bluetooth source.
3
Select > Discoverable to make the stereo visible to your compatible
Garmin watch.
4
Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT
5 Open the FUSION-Link app on the watch.
The first time you open the app on the watch, the watch automatically pairs
with and connects to the stereo. If you need to pair to another stereo, in the
FUSION-Link app, select Settings > Pair new.
6
Control the audio playback using the FUSION-Link app on the watch.
After the devices are paired, they connect automatically when they are turned on,
within range, and the app is open on the watch.

Playing Media

Selecting a Source
1
Select .
2
Select an option:
• Turn the dial to highlight a source.
• Select repeatedly to highlight a source.
3
Press the dial to select the source.
Setting the Tuner Region
You must select the region you are in to receive AM and FM stations properly.
6
If you are connected to a compatible SiriusXM
subscription (USA only), you must select the region you are in to receive
SiriusXM stations properly.
NOTE: SiriusXM is not available in all regions.
If you are connected to a compatible DAB module and antenna (not included),
you must select the region you are in to receive DAB stations properly.
NOTE: DAB stations are not available in all regions.
1
Select
2
Select the region you are in.
® devices while pairing.
Changing the Radio Station
1 Select an applicable source, such as FM.
2
Select
• Select Auto to scan and stop on the next available station.
• Select Manual to select a station manually.
• Select Presets to select a saved station preset.
3
Select
Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a compatible DAB
module and antenna (not included) to the stereo. Because DAB signals are
broadcast in select countries only, you must also set the tuner region to a
location where DAB signals are broadcast.
1
Select the DAB source.
2
Select
When scanning is complete, the first available station in the first ensemble
found begins playing.
NOTE: After the first scan is complete, you can select
DAB stations. When the re-scan is complete, the system starts playing the
first station in the ensemble you were listening to when you started the re-
scan.
® tuner and antenna, and have a
> Settings > Tuner Region.
repeatedly to move through the tuning modes:
or to tune to the station.
to scan for available DAB stations.
again to re-scan for
Quick Start Manual