Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has been prepared
for the owner and operators of a JET JDS-12X-M disc sander to promote safety during installation, operation and maintenance
procedures. Please read and understand the information contained in these operating instructions and the accompanying
documents. To obtain maximum life and efficiency from your sander, and to use the machine safely, read this manual thoroughly
and follow instructions carefully.
...Table of Contents
1. Declaration of conformity
On our own responsibility we hereby declare that this product
complies with the regulations listed on page 2.
2. Warranty
TOOL France SARL guarantees that the supplied product(s) is/are
free from material defects and manufacturing faults.
This warranty does not cover any defects which are caused,
either directly or indirectly, by incorrect use, carelessness,
damage due to accidents, repairs or inadequate maintenance or
cleaning as well as normal wear and tear.
Further details on warranty (e.g. warranty period) can be found
in the General Terms and Conditions (GTC) that are an
integral part of the contract.
These GTC may be viewed on the website of your dealer or sent
to you upon request.
TOOL France SARL reserves the right to make changes to the
product and accessories at any time.
3. Safety
3.1 Authorized use
This sander is designed for sanding wood and similar materials
only. Sanding of other materials is not permitted and may be
carried out in specific cases only after consulting with the
manufacturer.
The machine is not suitable for wet sanding.
The workpiece must allow to safely be loaded, supported and
guided.
The proper use also includes compliance with the operating and
maintenance instructions given in this manual.
The machine must be operated only by persons familiar with its
operation and maintenance and who are familiar with its
hazards.
The required minimum age must be observed.
The machine must only be used in a technically perfect
condition.
When working on the machine, all safety mechanisms and covers
must be mounted.
In addition to the safety requirements contained in these
operating instructions and your country's applicable regulations,
you should observe the generally recognized technical rules
concerning the operation of woodworking machines.
Publicité
Chapitres
Table des Matières
