Maintenance - Renson LAPURE Manuel D'utilisation

MAINTENANCE

Easy maintenance using the Renson Maintenance Kit
Your patio cover will always be exposed
to the elements outside. If you want to be
able to enjoy your Renson covering to the
fullest at any time, then we recommend
maintaining it regularly, i.e. once or twice
a year. This means the covering will last
longer. This product is available at your
installer.
The following are important:
∫ The structure is made using powder-
coated aluminium. An annual cleaning
using the Renson Maintenance Kit
products will ensure that the intense
colour is maintained for years, as well
as providing extra protection from
acid rain, sea air, and UV rays. We
recommend carrying out maintenance
on your installations at least twice a year
in coastal or forested regions.
∫ De Renson 'Clean' is a concentrated
product with strong cleaning and
degreasing properties to deal with the
most frequent kinds of natural filth,
such as dust, oily precipitation, grease
stains, moss, insect remains, etc.
This product cannot be compared to
most common cleaning products. It
penetrates deeply and 'lifts out' the
dirt. This product can also be used
to clean the polyester fabric roofs
and vertical fibreglass fabric screens.
After cleaning, you must protect the
aluminium structure using
'Protect'. This leaves a protective film
that allows the surface to cleaned by
simply wiping it down using a minimum
amount of Renson 'Clean'. It also
protects the aluminium from acid rain,
sea air, UV rays, and ensures that the
colour remains just as intense.
∫ Do not use either product in direct
sunlight or in hot weather. The product's
quick-drying action can leave stains on
the structure or the fabric screen. Do
not use corrosive or harsh products,
scouring pads, or other scouring
products. Do not use high-pressure
equipment in any case whatsoever.
Renson
Renson Maintenance Set
EN
89