Intended Use; Personnel Qualification - WIKA 232.30.63 Mode D'emploi

2. Safety

2.1 Intended use

These pressure gauges are used for measuring pressure and for the switch-
ing of switching currents in industrial applications.
GB
The pressure gauge has been designed and built solely for the intended
use described here and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on opera-
tion contrary to the intended use.

2.2 Personnel qualification

Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology and
on their experience and knowledge of country-specific regulations, current
standards and directives, are capable of carrying out the work described
and independently recognising potential hazards.
2.3 Safety instructions for pressure gauges per ATEX
6
WARNING!
Risk of injury if qualification is insufficient!
Improper handling can result in considerable injury and
damage to equipment.
The activities described in these operating instructions
may only be carried out by skilled personnel who have the
qualifications described below.
WARNING!
Non-observance of these instructions and their contents may
result in the loss of explosion protection.
WARNING!
It is imperative that the application conditions and safety
requirements of the EC-type examination certificate are
followed.
WIKA operating instructions model 232.3x.063 with 851 per ATEX