Special Hazards; Labelling / Safety Marks - WIKA 232.30.63 Mode D'emploi

2. Safety

2.4 Special hazards

GB
Only work on the gauge with the voltage disconnected.

2.5 Labelling / safety marks

Product label
8
WARNING!
Observe the information given in the applicable type
examination certificate and the relevant country-
specific regulations for installation and use in potentially
explosive atmospheres (e.g. IEC 60079-14, NEC, CEC).
Non-observance can result in serious injury and/or damage
to the equipment.
For additional important safety instructions see chapter
"2.3 Safety instructions for pressure gauges per ATEX"
WARNING!
When installing, commissioning and operating these
instruments, observe the appropriate national safety
regulations (e.g. VDE 0100).
WARNING!
Residual media in dismounted instruments can result in a
risk to persons, the environment and equipment.
Take sufficient precautionary measures.
WIKA operating instructions model 232.3x.063 with 851 per ATEX
Date of manufacture