General Notes; Safety Instructions - Aqualytic AL40 Mode D'emploi

General notes

GB

Safety Instructions

1 . Before using the unit, please read the operating manual supplied with the apparatus
carefully .
2 . Do not dispose of this equipment as urban waste
3 . In order to prevent possible risk of electric shocks, fire and personal injury when the
unit is being used, basic safety measures must always be taken, including:
4 . Do not turn the instrument on before positioning the beakers for protecting the blades .
Ensure that the power switch is turned to "0" (OFF) before removing the beakers
containing the stirring liquid .
5 . Check that the rating of external power supply corresponds to the rating of the electric
line .
6 . Do not use the unit if it is not working correctly . In case of malfunctioning,
contact your nearest assistance centre .
7 . Personal protective equipment must be compatible with the possible risks posed by the
material being processed and the glass parts .
8 . Follow the cleaning instructions described in this manual .
9 . This unit must only be used for laboratory applications
10 . The manufacturer declines all responsibility for any use of the unit that does not comply
with these instructions .
11 . This unit has been designed and produced in compliance with the following standards .
12 . Safety requirements for electrical apparatus for:
Measurement and control and for laboratory use
Electrical equipment for laboratory use
General requirement – Canadian electrical code
Note
• The manufacturer is committed to constantly improving the quality of the products and
reserves the right to modify the characteristics without prior notice .
18
CEI EN 61010-1
UL 3101-1
CAN/CSA-C22 .2
Floc-Tester_AL40_AL50_5 04/2014