Description Of Symbols - Michelin MEW 1050 Notice D'utilisation

2.1.7. Other safety information
Recoil is the sudden reaction as a result of a jammed or blocked moving
parts. Jamming or blocking leads to an abrupt stop of rotating parts.
This causes acceleration of any uncontrolled electric tools rotating in the
opposite direction at the point of blockage.
Recoil is the result of incorrect or wrong use of the electric tool. It can be
prevented by suitable precautions as described below.
a) Hold the electric tool securely and move your body and your
arms into a position in which you can absorb the force created
by the recoil.
b) Never move your hand into the vicinity of moving parts.
c) Keep your body out the area into which the Impact Wrench will
be moved if it suffers recoil.

2.1.8. Description of symbols

Pay attention to all the signs and symbols shown in these instructions and
on your Impact Wrench.
Make a note of these signs and symbols.
Important.
Read the instructions for use
before starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, protective
strong gloves.
8
Always use breathing
apparatus when working
with materials which
generate dust.
End of life machines contain
valuable materials and
therefore they should not
be placed in household
waste. We would ask you to
play your part in protecting
resources and help protect
the environment by
returning this machine to
a recycling point (if one is
available) when it reaches
the end of its life.