Michelin MEW 1050 Notice D'utilisation page 10

adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
Store tools out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tools operation. If damaged,
have the tool serviced before using. Many accidents are caused by poorly
maintained tools.
Use only accessories recommended by the manufacturer for your model.
Warning: Please stop the tool when you want to change the
running direction and change by pressing switch.
4. APPLICATION
This tool can be used for tyre changing, shock absorber replacement,
exhaust system work, lawn mower repair and small engine work,
assembling and unassembling bolts and nuts.
4.1. Switch (A)
Your tool starts or stops by depressing and releasing the rocker switch.
Press the buttom of the switch to go forward (clockwise). Press the top of
the switch to reverse (counter-clockwise).
4.2. Install/Remove sockets or Accessories (B)
To install a socket on the mounting shaft, align the hole of the socket with
the mounting shaft and push down firmly.
To remove a socket form the mounting shaft, pull the socket out firmly.
4.3. Introduction of the variable torque function & operation
Function
In tightening mode only, the torque can be set from 150-350Nm, press the
"+" or "-" button one time, the torque setting will increase or decrease for
10Nm. In loosening mode the torque default setting is 500Nm and cannot
be altered.
10