Electrical Safety; Personal Safety - Michelin MEW 1050 Notice D'utilisation

2.1.2. Electrical safety

a) The plug from this Impact Wrench must fit into the socket. The
plug should never be altered in any way.
b) Avoid bodily contact with earthed surfaces such as pipes,
heating, ovens and fridges.
c) Ensure the tool does not come into contact with water or
moisture.
d) Do not use the cable to carry the Impact Wrench, to hang it up
or to pull the plug out of the socket. Keep the cable away from
heat, oil, sharp edges and moving parts of the appliance.
e) If you are working outdoors with the Impact Wrench, only use
extension cables that are designed specifically for this purpose.
f) It is recommended to use a Residual Current Device (RCD).

2.1.3. Personal safety

a) Stay alert and concentrate on what you are doing and use the
Impact Wrench sensibly. Do not use the Impact Wrench if you are
tired or under the influence of drugs, alcohol or medication.
b) Wear personal protection equipment and always wear safety
goggles.
c) Make sure that the Impact Wrench cannot start up accidentally.
Ensure that the Impact Wrench is switched off before you
connect it to the power supply or pick up or carry the tool.
d) Avoid abnormal working postures. Make sure you stand squarely
and keep your balance at all times.
e) Wear suitable work clothes. Do not wear loose clothing or
jewellery. Keep hair, clothes and gloves away from moving
parts.
2.1.4. Usage and treatment of the Impact Wrench
a) Do not overload the appliance. Use the correct tool for your
work.
b) Do not use the Impact Wrench if it has a defective switch.
c) Remove the plug from the socket before making any
adjustments to the Impact Wrench.
6