GE GTH20JBBABB Manuel D'utilisation Et D'installation page 5

About the shelves and bins.
Not all features are on all models.
Full shelf
Some models have wire shelves that
can be adjusted in the same manner.
Half shelf
Rearranging the Shelves
Shelves in the refrigerator and freezer compartments are adjustable. Remove all items from
the shelves before any adjustment.
Refrigerator Compartment
To remove:
Tilt the shelf up at the front.
Pull the shelf out.
To replace:
While tilting the shelf up, insert it
in the refrigerator rib.
Slide in the shelf, until the shelf stop fits with the rib
To remove:
Tilt the shelf up at the front.
Lift the shelf up at the back and
bring the shelf out
To replace:
While tilting the shelf up, insert the top
hook at the back of the shelf in a slot on the track.
Use the right slot for the right shelf and vice versa.
Lower the front of the shelf until the
bottom of the shelf locks into place.
Freezer Compartment
To remove:
Lift up the left side of the shelf and
slide it left into the center of the shelf
supports.
Rotate the right side of the shelf up and
out of the shelf supports.
To replace:
Holding the shelf diagonally, insert the
left end of the shelf into the center of
the shelf supports on the side wall.
Insert the right end of the shelf into the
shelf supports. Rest each end of the shelf
on the bottom of the shelf supports.
geappliances.com
5