Replacing The Light Bulbs; Refrigerator Light - GE GTH20JBBABB Manuel D'utilisation Et D'installation

Replacing the light bulbs.

Turning the control to the O (off) position does not remove power to the light circuit.
Light shield
10

Refrigerator Light

CAUTION:
Light bulbs may be hot.
Unplug the refrigerator.
To remove the light shield, grasp the
shield at the back and pull out to release
the tabs at the back.
Rotate the shield down and then forward
to release the tabs at the front of the
shield.
Freezer Light (on some models)
CAUTION:
Light bulbs may be hot.
Unplug the refrigerator.
The bulb is located behind a light
shield at the back of the freezer
compartment. To remove, squeeze
the top and bottom of the shield and
pull the shield off.
After replacing with an appliance bulb
of the same or lower wattage,replace
the shield.
Plug the refrigerator back in.
NOTE: Appliance bulbs may be ordered from
GE Parts and Accessories, 800.626.2002.
In Canada 1.800.661.1616.
After replacing with an appliance bulb
of the same or lower wattage, replace
the shield.
Plug the refrigerator back in.