Regulations; Technical Data; Eu Declaration Of Conformity - stayer CD125K Instructions D'emploi

6. Regulations

6.1 Technical Data

= Power input
= No load speed
rpm
= Disc dimension
Ø
x
= Kerf width.
= Cutting depth.
y
= Protection class
= Weigth
L = Sound power level
WA
L = Sound pressure level
A
P
= Vibration
The values given are valid for nominal voltages [U] 230/240 V ~
50/60 Hz - 110/120 V ~ 60Hz. For lower voltage and models for
specific countries, these values can vary. Please observe the
article number on the type plate of your machine. The trade
names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 97 dB(A); Sound power level 108 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value a = 9.0m/s , Uncertainty K =2.0 m/s .
h
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
ENGLISH
2 2
24

6.2 EU declaration of conformity

The undersigned:
STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 91 691 85 16 / Fax: +34 91 691 91 72
CERTIFIES
That the machine:
Type: DIAMOND CHANNEL CUTTER
Models:
CD180K / CD125K
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents: EN 60745 according to EU Regulations
2004/108/CE, 2006/42/CE
Ramiro de la Fuente
Managing Director
24