Setting up your monitor stand
1.) Open the small box and remove the mains adapter. Plug it into the power socket, then insert the small plug into the monitor stand.
2.) The charging station will briefly light up in blue as soon as it is supplied with electricity.
3.) Now place your smartphone onto the wireless charging logo.
4.) A green light will shine on the charger throughout the whole charging process.
Care and maintenance
➔ Use a soft, dry cloth to clean the stand. Do not use an abrasive cleaning agent. Do not allow water to get inside the product.
Designated use & safety instructions
➔ The intended use of this monitor stand is to hold a monitor and to charge electrical devices via the wireless charging station and the USB
ports.
➔ Only suitable for standard monitors, up to 5 kg in weight.
➔ The monitor stand is for indoor use only. Please do not use the monitor stand outside. Protect the product from dirt and moisture.
➔ Due to safety and CE approval regulations, the modification and/or alteration of this device is not permitted. The device must not be exposed
to strong mechanical stress.
Exemption from liability
Sigel GmbH does not assume any liability or warranty claims for any form of damage resulting from improper use of the product, or from a failure
to follow the instructions for use and/or the safety instructions.
Environmental protection
Electrical and electronic devices, including batteries, must not be disposed of in the normal household waste. As a consumer, you have a legal ob-
ligation to either dispose of such devices and batteries at a public collection point for electrical waste or to return them to the place of purchase.
Symbols and labelling of this device
Conformity with the CE directive
Class II – protection class of the mains adapter
Class III – protection class of the monitor stand
Disposal
The crossed-out wheeled bin symbol means that this product must not be disposed of with ordinary household waste. You are legally
obliged to dispose of electrical equipment and dead batteries/storage batteries at an official public collection point. The disposal of such items is
free of charge. For further information, contact your city or local council, or the shop from which the product was purchased.
EU declaration of conformity
Sigel GbmH, Baeumenheimer Strasse 10, 86690 Mertingen, hereby declares that this product, when used correctly, complies with the require-
ments and provisions of the low voltage directive, the electromagnetic compatibility directive and the restriction of hazardous substances direc-
tive. To request a copy of the declaration of conformity, contact us at info@sigel.de.
Guarantee: 2 years
Sigel product guarantee: in order to meet the highest standards, all Sigel products undergo rigorous quality control. If, despite this, the product
does not meet the expected standards of quality, please contact us.
Prod. code SA 405 / UK version prod. code SA 406
Version: July 2018
Indoor use only
Direct current
Positive polarity of DC power connector
7