Installation - Pelgrim PF6164 Notice D'utilisation

Installation

General
The fitting of the appliance should only be
carried out by a registered fitter.
The appliance is not connected to the flue gas
outlet channel.
Please note:
The power rating and required mains voltage
are shown on the rating plate at the back
of the oven. Connection should take place
according to national and local regulations.
If the specified power is more than 3 kW, a
socket suitable for current greater than 13 A
must be used.
Electrical connection 230 V - 50 Hz .
The electrical connection must comply
n
with national and local regulations. For the
Netherlands this includes the NEN 1010
amongst other standards.
Wall socket and plug must be accessible at
n
all times.
The appliance should always be earthed.
Use good quality cable for connecting e.g.
H05RRF, 1,5 or 2,5 mm , with 3 or 5 cores,
2
depending on the regulations.
If you want to make a fixed connection,
ensure that a multi-pole switch with a
distance between contacts of 3 mm is
installed in the supply cable.
Built-in dimensions
600 600
900-
915
front view side view
Attention:
When the oven is placed next to a high
cupboard or another wall made of flammable
material the minimum distance between the
cooker and walls should be at least 50 mm.
The minimum distance between the hotplate
and a cooker hood installed above it should
be at least 650 mm.
If the oven is to be installed in a piece
of kitchen furniture, the minimum space
indicated must be observed.
If the oven is to be installed between kitchen
cupboards, the panelling of the adjacent
kitchen units must be able to withstand
temperatures of at least 90 °C.
Levelling
The height of the oven can be adjusted with
the adjustable feet.