Before Using Your Appliance; Pans - Pelgrim PF6164 Notice D'utilisation

Before using your appliance

Oven
Prepare for use
Remove the sticker from the glass panel in
n
the oven door.
Remove the protective foil from stainless
n
steel doors.
Remove all accessories from the oven
n
and clean them thoroughly using a dish-
washing detergent. Switch on the closed,
empty oven at the maximum temperature
for about thirty minutes, after which the
grilling element should be switched on for
a period of fifteen minutes. Let the oven
cool off and clean it with warm water.
Please note:
When the oven is heated to a high temperature
for the first time, you will smell a "new
appliance" odour. This is to be expected.
Clock
The symbol flickers if you have not yet set
the time of day.
Setting the time of day
There is a 24-hour clock on the display that
n
indicates the time of day.
Press the 'mode' key until the symbol
flickers.
Press the –/+ keys until the right time is
n
reached. Now wait 5 seconds. The time of
day is automatically set.
Cermamic hob
You may turn the switch either to the left or
the right. The switch has 6 settings.
Operating control light
The control light is situated on the control
panel indicates that one or more cooking
zones are in use.
Saucepans
Never leave an empty pan on a cooking zone
that is switched on. Do not allow the pan to
boil dry, either. Although the hob is protected
against overheating, the pan will get very hot,
which may damage it.
Do not use pans that are smaller than the
cooking zone. This will prevent food spills
on the very hot cooking zone. Burnt-on food
spills are difficult to remove.
Kitchen timer
The kitchen timer goes off after a pre-set time
has elapsed. The kitchen timer does not turn
the oven off.
Press the 'mode' key until the symbol
n
flickers in the display.
Set the cooking time using the –/+ keys.
n
Now wait 5 seconds. The cooking time is
set automatically. The time of day
reappears and stops flickering.
Press the 'mode' key until the symbol
n
flickers in the display, to view the
remaining time.
The alarm goes off after the pre-set time
n
has elapsed. The symbol in the display
flickers. Turn the alarm
off by pressing one of the 3 keys.