Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
! If the appliance is connected to liquid gas, the regulation
screw must be fastened as tightly as possible.
! Once this procedure is finished, replace the old rating
sticker with one indicating the new type of gas used. Stickers
are available from any of our Service Centres.
! Should the gas pressure used be different (or vary slightly)
from the recommended pressure, a suitable pressure
regulator must be fitted to the inlet pipe (in order to comply
with current national regulations).
Burner and nozzle specifications (for 60 cm and 65 cm versions only)
Table 1
Burner
Diameter
(mm)
Fast (R)
100
Reduced Fast (RR)
100
Semi Fast (S)
75
Auxiliary (A)
55
Triple Crown (TC)
130
Double flame
30
(DCDR internal) (1)
(DCDR
Double
internal)
flame (1)
130
(DCDR
external
2 nozzle)
Double Flame
30
(DCDR Internal) (2)
Double Flame
130
(DCDR External)
2 nozzle (2)
Supply pressures
(1) For single-control DRDA (DCDR) burner only
(2) For dual-control DRDA (DCDR) burner only
*
At 15°C and 1013,25 mbar - dry gas
**
Propane P.C.S. = 50.37 MJ/Kg
***
Butane P.C.S. = 49.47 MJ/Kg
Natural P.C.S. = 37.78 MJ/m³
Liquid Gas
Thermal
Thermal
By-pass
power
power
1/100
kW
kW
(p.c.s.*)
(p.c.s.*)
Reduced
Nominal
(mm)
0.70
3.00
39
0.70
2.60
39
0.40
1.65
28
0.40
1.00
28
1.50
3.30
61
0,30
0,90
27
27
1,50
3,60
55
0.40
0.90
28
1.50
3.60
61
Nominal (mbar)
Minimum (mbar)
Maximum (mbar)
DATA PLATE
Electrical
see data plate
connections
This appliance conforms to the following
European Economic Community directives:
- 2006/95/EEC dated 12/12/06 (Low
Voltage) and subsequent amendments
- 2004/108/EEC dated 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2009/142/EEC dated 30/11/09 (Gas) and
subsequent amendments.
- 2012/19/EC and subsequent
amendments.
Nozzle
Flow*
1/100
(g/h)
(mm)
***
**
86
218
214
80
189
186
64
120
118
50
73
71
65x2
240
236
44
65
64
44
262
257
60x2
44
65
64
67x2
262
257
28-30
37
20
25
35
45
Natural Gas
Thermal
Nozzle
Flow*
power
1/100
(l/h)
kW
(p.c.s.*)
Nominal
(mm)
3.00
132 (H3)
286
2.60
122 (H3)
248
1.65
96 (Z)
157
1.00
79 (6)
95
3.60
103x2
343
0,90
74
86
74
3,60
343
94x2
86
0.90
74
343
3.60
100x2
20
17
25
GB
25
Publicité
Table des Matières
