Table Des Matières; Thanks For Choosing Toto; Care And Cleaning; Caution - Toto TS960C Série Manuel D'installation

TABLE OF CONTENTS
Thanks For Choosing TOTO ! ........................................................................................................
®
Care and Cleaning ..........................................................................................................................
Caution ............................................................................................................................................
Before Installation ...........................................................................................................................
Tools You Will Need ........................................................................................................................
Calibrating the Valve .......................................................................................................................
Trim Installation ...............................................................................................................................
Installation Check ............................................................................................................................
Rough-In .........................................................................................................................................

THANKS FOR CHOOSING TOTO

TOTO's mission is to provide the world with healthy, hygienic and more comfortable lifestyles. We
®
design every product with the balance of form and function as a guiding principle. Congratulations
on your choice.

CARE AND CLEANING

Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning
it periodically with mild soap, rinse thoroughly with warm water and dry with a clean, soft cloth. Do
not use abrasive cleaners, steel wool or harsh chemicals as these will dull the finish. Failure to
follow these instructions may void your warranty.
!
■ RISK OF SCALDING: THIS VALVE MUST BE CALIBRATED BY THE INSTALLER. SEE VALVE CALIBRA-
TION PROCEDURE. Once calibrated, this valve has a limiter to prevent the temperature from exceeding
120º F (49º C).
This valve was calibrated at the factory at the following conditions:
Hot: 140º F (60º C) at 14.5 psi (0.1 Mpa)
Cold: 60º F (15º C) at 14.5 psi (0.1 Mpa)
■ Operating condition:
Minimum Pressure .................7 psi
Maximum Pressure ................108 psi
If the water pressure exceeds 108 psi, use a pressure reducing valve to reduce the pressure down to a safe
level.
■ Supply hot water temperature should not exceed 185º F (85º C). Using the valve above this temperature will
shorten the life of valve or damage the valve and could result in leaks.
■ Do not reverse the hot and cold water inlets.
■ Insulate the hot supply pipe to minimize heat loss.
■ Do not use steam for hot water supply.
■ Do not disassemble the thermo unit.
!
®

CAUTION

2
2
Le mécanisme TS960C* requiert le robinet TSTA
2
Le mécanisme TS960D* requiert le robinet TSTD
2
3
3
4
5
2.0"
6
(5.1 cm)
7
2.0"
(5.1 cm)
6-11/16"
(17.0 cm)
ROBINETTERIE
1-3/4" (4.5cm) min.
2-9/16" (6.5cm) max.
2-1/4" (5.7cm) min.
3.0" (7.6 cm) max.
10-1/4"
3-15/16"
(26.0 cm)
(10.0 cm)
19