Berner BWDVC 26 Notice D'utilisation D'origine page 18

D
BERNER BWDVC 26 / BWDVC 28 L
GB
BWDVC 28 L only:
F
When dust removers are used, the rate at which air is exchanged in the room must be adequate if the
exhaust air from the vacuum cleaner is blown into the room (please observe regulations valid in your
NL
country).
Before starting work, the operating staff must be informed on
I
– use of the vacuum cleaner
– risks associated with the material to be picked up
N
– safe disposal of the picked up material
S
Operation
DK
BWDVC 26
Switch position
SF
E
BWDVC 28 L
P
Switch position
TR
HR
Picking up liquids
SK
Before liquids are picked up, always remove the filter bag. Check that the float works properly. If foam
develops or liquid emerges, stop work immediately and empty the dirt tank.
CZ
Cleaning the filter element
PL
If suction performance drops:
1. Switching on the vacuum cleaner.
H
2. Close the nozzles or suction hose opening with the palm of your hand.
3. Press the button to start filter cleaning for at least three times for two seconds each. The resulting
RO
stream of air removes attached dust from the slats of the filter elements.
4. If the suction power is too low after filter cleaning: replace filter.
LV
Blower function
E
LT
The cleaner has a blower function to clean inaccessible places or to dry the surface of wet items.
Do not direct the air into rooms in an uncontrolled manner. When using the blower function, always
use a clean hose. Stirred-up dust can be hazardous to health. Do not use the blower function in closed
rooms.
Connecting electrical appliances
F
Use the socket on the vacuum cleaner for the purpose defined in the operating instructions only.
Before plugging an appliance into the appliance socket:
1. Switch off the vacuum cleaner.
2. Switch off the appliance to be connected.
CAUTION! Follow the operating instructions and safety instructions for appliances connected to the
power tool socket.
18
I
0
I On, continuously variable adjustment of the suction power
0
Auto-On/Off, continuously variable adjustment of the suction power
Function
On
Off
Auto-On/Off
Function
Off