Fitting The Doors - Bosch KAD90 Série Notice D'utilisation Et De Montage

en
Note
Due to its own weight or when the door is filled with
foodstuffs, it is possible that the fridge compartment
door leans even when the appliance is standing up
vertically. The door gap at the top and at the bottom is
not identical.
If the door gap at the top and at the bottom is not
identical:
1. Unscrew 2 screws and remove the top hinged
cover.
2. Slacken the hinge screw.
Do not unscrew the screw completely!
3. Adjust the fridge compartment door's vertical
alignment.
4. Tighten the hinge screw.
5. Apply the hinged cover and fasten with 2 screws.
40

Fitting the doors

If the appliance is too big to fit through the doors of
your home, the door handles or the appliance doors
can be unscrewed.
Note
The door handles or the appliance doors may only be
removed by an After-sales Service technician. Your
local After-sales Service centre will advise you of the
cost.