Cleaning And Disinfecting - Philips AVENT SCF430 Mode D'emploi

8
English

Cleaning and disinfecting

Step 1: Disassembling
Disassemble the breast pump and bottle completely. Also remove the white valve
from the breast pump.
Step 2: Cleaning
The parts can be cleaned manually or in the dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to
clean the breast pump parts as this may cause damage.
Step 2A: Manual cleaning
1 Rinse all parts under a running tap with lukewarm water.
2 Soak all parts for 5 minutes in warm water with some mild dishwashing liquid.
3 Clean all parts with a cleaning brush.
4 Thoroughly rinse all parts under a running tap with cold clear water.
5 Leave all parts to air-dry on a clean tea towel or drying rack.
Step 2B: Cleaning in the dishwasher
Note: Food colorings may discolor parts.
1 Place all parts on the top rack of the dishwasher.
2 Put dishwashing liquid or a tablet in the machine and run a standard program.
3 Leave all parts to air-dry on a clean tea towel or drying rack.
Step 3: Disinfecting
Caution: During disinfection with boiling water, prevent the bottle or
other parts from touching the side of the pot. This can cause irreversible
product deformation or damage that Philips cannot be held liable for.
1 Fill a household pot with enough water to cover all parts and place all parts in
the pot. Let the water boil for 5 minutes. Make sure the parts do not touch the
side of the pot.
2 Allow the water to cool down.
3 Gently remove the parts from the water. Place the parts on a clean surface, tea
towel or drying rack to air-dry.