GRAUPNER 2-6S EH Instructions D'utilisation page 15

Operation
Activate the storage discharge function
Can cel
Disc harge Bal ance
Mod e
Can cel Disc harge
Bal ance
Mod e
Can cel
Disc harge
Bal ance
Mod e
Connect the battery on the right side balancer jacks so that the display is
activated.
EH-jack only: note the marked GND-, here the negative terminal of the ba-
lancer must be inserted!
The individual cell voltages on the left and the symbols for the number of
cells appear to the right, also the total voltage „Total" at the bottom of the
display.
1. Now press the button
2. The balancer starts the balancing process indicated by the battery icon.
The fl ashing
discharged.
The balancer discharges and balances the individual cells to the under
„Discharge Voltage Set" programmed voltage. This process continues
until all cells have reached this voltage.
3. The discharge process is completed when all
press the button „Cancel" to exit. You can now disconnect the battery.
Note: You can cancel the ongoing discharge at any time by pressing the
„Cancel" button.
„Discharge" once.
icon appears behind these cells which are currently
icons are off. Now
Operation 15