Madison MAD-TA10BT Manuel D'utilisation page 8

Reconnect to an existing paired device
The system automatically reconnects to the last connected device.
•
• Enter the Bluetooth menu of your smartphone or music player and select
'TA10BT' from the list of previously connected devices and select CONNECT.
Your device is now reconnected to your system.
•
Playback control
The remote can control following functions:
• Volume up/down
Next/previous track
•
Play/pause
•
Notes:
If pairing fails the first time, turn off your system and back on. Then follow the
procedure from the beginning of this section.
If you are unable to reconnect to a previously connected device, remove or erase the
TA10BT from the list of paired devices from your smartphone and follow the
instructions of 'Pairing a new device'.
ITEM
Description :
Power Requirements :
Bluetooth specification
Amplifier output
Impedance
Sensitivity
Treble/Bass
Signal to Noise Ratio :
Main Channel (1KHz) :
Frequency
Dimensions :
Electric products must not be put into household waste. Please bring them
to a recycling centre. Ask your local authorities or your dealer about the way
to proceed.
©Copyright LOTRONIC 2015
Specifications :
SPECIFICATIONS
Tube amplifier
AC 220-240V/ 50/60 HZ 80W
Version 2.1
Receiver support : HFP 1.5, HSP, A2DP 1.0 , AVRCP 1.0,
OPP, PBAP
Frequences : 2402-2480MHz
Range : 10m
40W
47kOhms
<600mV
+/-10dB
>85dB
0.01%
20Hz-20KHz+2dB
270 x 280 x 140mm
MAD-TA10BT 8